We have a wide selection of raised access flooring accessories available. Please browse through our accessories section for more details and check back regularly as we are always adding to our services.
Please contact us on email@example.com for your specific requirements.
Pedestals are an integral part of any raised access floor system. RMF Raised Access Floor systems incorporate a wide selection of different grade pedestals, available in a variety of “void” heights from 26mm through to 1525mm to achieve a variety of finished floor levels.
Constructed from corrosion resistant steel, all RMF pedestals incorporate a locking nut to offer a position locking facility, and are manufactured & tested for use with all RMF Systems. RMF pedestals can be supplied with a variety of hole centres, slotted to take stringers, or with angle heads where floor ramps are required.
RMF MD pedestals
RMF MD pedestal range are full steel pedestals designed to meet the requirements of light to medium duty applications for RMF raised floor systems.
RMF HD pedestals
RMF HD pedestal range are full steel pedestals designed to meet the requirements of medium to heavy duty applications for RMF raised floor systems.
RMF XD pedestals
RMF XD pedestals are full steel pedestals designed to meet the requirements of medium to extra heavy duty applications for RMF raised floor systems and provide an ideal solution where extra rigidity or greater floor heights are required.
RMF Floor Sealer is a water based dust sealer for porous substrates. It can easily be applied by brush, roller or squeegee and when cured forms a hard clear film that has excellent adhesion to stone and concrete surfaces.
One Part Pedestal Adhesive
Our one part pedestal adhesive supplied in 9Kg tubs, is convenient and easy to use to bond pedestals to pre-sealed concrete floors.
Two Part Pedestal Adhesive
Two part solvent free polyurethane adhesives available specially designed for bonding pedestals to pre-sealed concrete floors.
A range of lifting tools are available for use with bare panels or panels with carpet, vinyl or laminate bonded floor coverings.
Aluminium Tape & Neoprene Foam Strip
Moisture resistant and class ‘O’ fire resistant aluminium tape for sealing the edges of cut panels.
Class ‘O’ fire resistant neoprene 10mm foam strip for the perimeter panels to fill the gap between the panel and the abutment.
RMF Under Floor Fire Barrier is a high density mineral wool and foil faced fire, smoke and acoustic barrier for raised access floor voids.
Supplied both cut to size or in slab form, the fire barrier is suitable for voids between 15mm and 1000mm and can provide up to 120 minutes fire resistance, preventing the passage of flame and smoke through the void.
RMF Fire Barrier also has acoustic properties to reduce flanking transmission of sound through the void by at least 9dB. Where the barrier is installed beneath a partition line into an imperforate timber based access floor system of at least 30mm thickness, with floor covering over, the room to room sound reduction on the path of the fire barrier will be at least 45dB.
- Subdivision of large uninterrupted cavities.
- To comply with Building Regulations – 30 minutes integrity plus 15 minutes insulation.
- To comply with LPC Design Guides – 30 minutes integrity plus 30 minutes insulation.
- Alignment under a partition, to maintain partition rating.
- 30 minute partition – 30 minutes integrity plus 30 minutes insulation.
- 60 minute partition – 60 minutes integrity plus 60 minutes insulation.
- 120 minute partition – 120 minutes integrity plus 120 minutes insulation